Vertical scissor lift V55AK54-MB

5.5 t, electrohydraulic, platform length 5400 mm, vertical arrangement of the lifting scissors

MPN: 820239
Category:
Tags: ,

Share on:

Description

The vertical scissor lifts V55AK54-MB and V45AK48-MB are high-precision lifts for wheel alignment with a lifting capacity of 5.5 t for passenger and utility vehicles and 4.5 t for passenger vehicles.

  • Perfect corrosion protection – KTL coating plus powder coating as standard
  • Meets requirements of Mercedes-Benz
  • A lot of space under the lifting platform with side access
  • Integrated recesses with stainless steel supports allow all commercially available rotary disks to be fitted, prevent corrosion and allow the rotary disks to be moved effortlessly.
  • The recesses can be closed completely when no rotary disk is used. The filler pieces are provided with plastic stops. Thus, corrosion is prevented and the noise is reduced.
  • The main cylinders are equipped with a pneumatically unlockable set-down device. The ratchet strip is screwed and adjustable via screws. This guarantees precise wheel alignment.
  • Smartly designed roll-back guards allow the full length of the track to be used.
  • Galvanized running rail for standard jacking beam (4 t for V55AK54-MB, 2.6 t for V45AK48-MB).
  • Reception from Smart to Sprinter van with long wheelbase possible.
  • The control panel is equipped with a factory pre-assembled hydraulic unit that can be placed on the left or right.
  • Documents or tablet computers will have their place on the control console that is also perfectly suited as a writing support.
  • Durable push buttons allow a sensitive operation of the lift.
  • The standard CE stop ensures foot protection without a foot guard.
  • The lifting scissors engage close to the wheel contact area and thus give the lifting platform high stability. In conjunction with the reinforced driving surfaces that are pre-adjusted at the factory it meets the specifications of Mercedes-Benz.
  • The assembly provides maximum clearance under the lifting platform and allows access from the side.
  • The flat driving surface allows use at the headlight adjustment area.
  • Sturdy plastic balls of the manually lockable sliding plates ensure reliable and smooth operation while rotating brushes prevent the penetration of dirt and ensure a long service life.
  • The driving surfaces include the holes for the camera mountings used for the Daimler AG approved Butler wheel aligner ex works.
  • Energy kit 220 V and compressed air under the driving surface as standard
  • Lighting, MKS bracket as standard

Media

Similar Products

Accessories

Delivery

Tech Data

FeaturesVertical scissor lift V55AK54-MBVertical scissor lift V55AK54-MBVertical scissor lift V45AK48-MBVertical scissor lift V45AK48-MBVertical scissor lift V65N60-MBVertical scissor lift V65N60-MB
Scissor lift designScissors with runwaysScissors with runwaysScissors with runways
Mode of driveelectrohydraulicelectrohydraulicelectrohydraulic
Type of installationsurface mountedsurface mountedsurface mounted
Rated load capacity5500kg4500kg6500kg
Max. lifting height1800mm1800mm1800mm
Lifting time35s35s45s
Lifting time loaded45s45s
Lowering time35s35s45s
Lowering time loaded45s45s
Play detectornot possiblenot possiblenot possible
Surface coatingPowder coatedPowder coatedPowder coated
Corrosion preventingCathodic electrodeposition coating (CEC)Cathodic electrodeposition coating (CEC)Cathodic electrodeposition coating (CEC)
Wheel alignmentstandardstandardstandard
Length of platforms5400mm4800mm6000mm
Wheel free liftnot possiblenot possiblenot possible
Driving power4 x 2,6kW4 x 2,6kW4 x 2,6kW
Power supply400 V | 50 Hz400 V | 50 Hz400 V | 50 Hz
Length6220mm5710mm6820mm
Width2200mm2200mm2200mm
Installation depth305mm320mm305mm

Change region

Select your region Select your language